Quantcast
Channel: AOMEI Products Support — AOMEI Forum
Viewing all 8490 articles
Browse latest View live

"Access denied" trying to open document in a backup image

$
0
0

I've created an image of my hard drive and have now opened it with "Explore Image". I need to review some documents from the image and copy some to my new hard drive. No matter what file I try to open (.txt, .doc, .docx, .jpg, .zip.....), I get an "access denied" or "you do not have necessary permission" messages. 


I am a local administrator on the laptop I'm using. I've looked at the owner of the directories in the image and they all show "TrustedInstaller". I have tried to change the owner but I get a message saying "Unable to set new owner on WIN7_4.1.8 (F:) The media is write protected."


I'd appreciate any help in getting to my files.



OneKey Recovery not setting up

$
0
0

From the beginning.

I have Lenovo B50-70 with win 8.1 preinstalled and Lenovo OKR. I upgraded to win 10 and wanted win 10 to be in my recovery partition, so uninstalled the Lenovo OKR and deleted teh lenovo partition. Then I installed AOMEI OKR and created the recovery partiton which came to about 40 GB since I had installed al lthe software , to which I would like ot recover in case I had to use the reocvery partition.

Windows 10 started giving problems and I had to move back to win 8.1, which I did after lots of search for the OEM copy of the Core Connected Single Language version. Now I have deleted the AOMEI win 10 recovery partiton and am trying to install AOMEI OKR once again. But it gives message that windows will need to boot in to Windows PE environment to create partitions and finish process. I click OK to continue and it does some process in windows itself. Then it restarts , but doesnt reboot in windows PE . It loads windows 8.1 and no recovery partition is created.

Where am i going wrong?

In the disk management I can see many small partitions(MBR, OEM, Recovery, etc.) do i need to delete this? Or does my windows edition not include windows PE?


Silent install?

$
0
0

Is there any command line switch for installing Backupper silently?     /SILENT does not work

How to include USB 3.0 support driver to Backupper generated Win PE boot media?

$
0
0

Hi,


My computer is an Asus Vivo Mini UN62 that runs with Windows 7 and features only USB 3.0 slots. I created a boot medium with Win PE 3.1 from Backupper Standard 2.8 and managed to have the bios boot from this medium. But, as it turns out, Win PE does not seems to include any USB 3.0 driver in it. Therefore, once Backupper's recovery software is loaded, I have no way to operate it since neither the keyboard or the mouse will respond.


How can I solve this issue?


Thank you, very much, in advance, for your attention and reply.


Fantasio

How To Restore Disk Backup In List Of Disk Backups In AOMEI Backupper App

$
0
0

In AOMEI Backupper I mistakenly deleted a disk backup (by going to Advanced | Delete Backup) while the external HDD that contained the backup was not attached to the computer. So the backup was deleted from the AOMEI Backupper app, but the actual backup (i.e., backup folder and .adi file) remains on the external HDD). Now I wish to have access to that backup on the external HDD, but it has been deleted from the list of backups in the AOMEI Backupper app itself, and it does not reappear when I attach the external HDD to the computer, even though the backup is on the external HDD.

 

Is there a way I can restore the backup in question to the list of backups in the AOMEI Backupper app?

 

Thank you in advance for your help.


AOMEI Backupper Standard- Notification mail not sent

$
0
0

I am not receiving any notification mail since October 29. The test is failing on both sending methods.

Problem with initial full backup?

$
0
0

I have a strange situation. I have two, very similar Windows 7 PCs. I put AOMEI Backupper on both, backing up to NAS shares. On the first PC, the backups and image verifications go fine. On the second PC, I have tried to do a full backup 8 times. Each time it says it failed the post-backup image verification. HOWEVER, if I do an image check of the 'failed' PC #2 images from PC #1, it says they are valid images! I can even mount them and browse the files. What would cause PC #2 to think that the backups are failing every time? I'm not sure I can trust that I will be able to restore PC #2 from these images. Also, I doubt I can schedule incremental backups if the PC thinks I never got a good first full backup. Thanks for any advice you may have.

Information Code:303 "Invalid network path or sharing service has been disabled"

$
0
0

Hi All... I'm using BackUpper Pro paid version 3.0 and I've had no real problems until a recent Win10 upgrade. I've trawled through a lot of these posts and only found one other person asking for help on this issue (rskmuthu - he hasn't had an answer to his input on 26Oct15). This backup is between 2 NAS drives and nothing has been changed as regards settings. So, can anyone help please?

The backup concerned involves my media library which is 755GB in size and I do not wish to recreate or find that a restore fails...  By the way, I am able to browse the initial main backup, which is reassuring, but I can't initiate the 1st incremental. I have cheched for sharing issues but could find none.

Can someone please advise... cos I'm beginning to loose faith in this product.


  Execution time:    14/11/2015 10:15:35
       Plan name:    Cloud Public Media Backup_26Aug15
       Operation:    File Full Backup
Execution result:    Failed
      Error code:    303
     Description:    Invalid network path or sharing service has been disabled. Please check whether the network is accessible and whether the sharing service of the target computer exists, and then try again.


PXE Boot works but still not possible to restore image ??

$
0
0

I've installed PXE Boot succesfully and also created an iso made with the PE Builder.

When booting with PXE, I can see the computer connects and the iso is transferred to the computer without any problem.

The image is loaded and the GUI from Aomei is shown. I click on Restore image but then I can only see the harddisk from the computer and not the disk on the master computer where the images are stored...

When I click Share/NAS to see if I can see my images I need to set an IP (I don't know beause this is done by the DHCP from PXE boot)

If I type the name from the master computer I still cannot connect to the master computer...

Who can help me and guide me through the correct steps or settings so I can restore the image through PXE Boot to the computer.........

How do you partition empty Hard Drive

$
0
0

We want to clone my system HD to empty HD.  The empty hard drive has to be partition.  We have Partition Assitance Standard installed. I am not sure the step to take. I using Windows 10 

Need to image - BUT, Concerned about these pre-partitions ...

$
0
0

Hi,

I am completely new to Aomei Backupper (and imaging). However, I have done backups for years with NovaStor. I
chose AB, after lots of research, for purposes of OS imaging and backup to both USB's and external HDD's. I plan on  using it on both laptop and desktop computers.  I hope I made the right decision. I 
am wanting to get very serious about imaging, backing up, and system
restoring. Here is my question:

1.)    I have a brand new Dell 3550 i5 laptop.

2.)    I have installed MiniTool Partition Wizard.

3.)    I notice that there are two partitions "before" the main 'C Drive'. (See attachment).  This is the way the laptop arrived. I did not partition these two partitions into the structure of the hard drive.

4.)   
What concerns and/or cautions should I have about creating an image that has the OS partition 'and' these two pre-
partitions for restoring the operating system and a few
software programs back onto the laptop?

5.)    OR - are those two pre-partitions necessary to include in the image?

6.)    Can AB handle this type of an environment?

7.)   
Note that I have my data on a separate partition. I do not want to
include that partition on the OS image for restore purposes; I only want to currently pay attention to just the OS and the two partitions before it.

Below is a screen shot of the partitions that I am talking about.

imagemtpw1.png

Thanks for any guidance and advice,

Dekade


Clone To Partition

$
0
0

I learned my lesson and now am a serious cloner! I am using your partition tool as well as the cloning tool and have a question that I can not seem to find an answer to on this forum. I have a second large hard drive in my computer that I would like to clone drive C to so that I can clone it to another hard drive if my C drive fails again.


It looks like I can only clone one partition at a time  and not the entire clone at once because I am cloning to a large partition I created and not an empty fresh drive. When I try to clone the entire disc it will not let me unless I do one partition at a time. Is this a limitation to the basic program? Is there a way to do what I seek?!

I am also looking for an automated way to do this so it clones my drive once a week....give a hand to a reformed non cloner!


I do use Carbonite so all is not lost but this looks like a great addition to that to save huge headaches to a guy like me!


Thanks!!

GPT partitioned disk legacy boot not supported error

$
0
0

Having some issues on HP computer we purchased...I can backup and restore the drives but after restore I get the error: GPT Partitioned disk legacy boot not supported...this seems to happen requardless of wheather UEFI is enabled or disabled.


Any pointers would be helpful

Backupper Pro Free?

AOMEI PREOS blocked at 90% for hours....

$
0
0

How long could this take ?

I have allready pass a whole day on that !

Can I reboot like a cowboy ?


Scheduled Clone

$
0
0

Backupper Pro command line can implement the 'clone' feature.
While this works as advertised I took it further and included it in a batch file which can be run under the Task Scheduler in Windows 7 to automate the cloning.
Since the destination drive may be plugged into a USB port and drive letters are known to change I decided that the disk label or name would be used to search for the destination drive instead of a drive letter - that's because even if the disk letter changes, the label doesn't.
My batch file has two references to the disk name/label  (I used the name 'nonsuch')   -  change these two references to match your destination drive name.

You should be familiar with the command line options before proceeding.
Anyone familiar with batch files should have no problems  - others should be careful lest you end up writing the clone to the wrong drive: this generally ends in tears and curses.

The 'AMBackup'  option " /a" refers to the destination being an ssd drive, this option would be omitted for a regular hard drive.

Ahem, if Admin would like to give me a registered copy of the program for my efforts, I wouldn't say no image

Copy and paste the following lines into Notepad, change the nonsuch references to reflect your drive label, omit the /a option if necessary  and save the file with the .bat extension, e.g. clone.bat


for /f "delims=" %%a in ('WMIC Path Win32_volume where "Label='nonsuch'" Get DriveLetter /format:list') do >nul 2>&1 set "SystemVolume_%%a"
   SET _test=%SystemVolume_DriveLetter%
   SET _result=%_test::=%   
AMBackup /c /t system /d %_result%  /a /o yes
REM the following line labels the destination disk back to it's original name - in this instance it's 'nonsuch'.
label %_result%: nonsuch
exit

OneKey Windows 10 "Failed to initialize the Program" error

$
0
0

Great product that I have used on several of my 8.x computers.  Upgraded one from Win 7 -> Win 10 (6.2.9200.2).  Deleted existing recovery partition, installed ADK ( both 8.x and 10.x versions), and ran OneKey.  It completes the first phase and initiates a restart, briefly flashes the OneKey Loader, then gives the message:


    "Failed to initialize the program due to unknown reasons" ...


Looking at the disk partitions afterwards I see no recovery partition created.


The computer is 

    Lenovo IdeaCentre K330A, 

    AMD x64, 

    8GB ram, 

    DPKT15a 2/25/11 Bios


The full contents of all the logfiles can be seen at https://www.dropbox.com/s/3jlbbe06sjgoal7/OneKey151118.txt?dl=0


The log1.txt file contains the following errors


    diskinfo.h(451): Failed to init GPT style table.

    [2       ]dyndisk.cpp(213): Failed to RegQueryValueEx on GetSysDgGuid.

    [0       ]ldmio.cpp(89): No dynamic disks are found.


    BootQuickCfg.h(24): =========================CBootQuickCfg======================

    [0       ]BootQuickCfg.cpp(361): /////////////////////////////RemoveBootOption//////////////////////////////

    [0       ]BootQuickCfg.cpp(371): SystemVersion = 6

    [6       ]bootset.cpp(1249): Failed to get our option.

    [6       ]bootset.cpp(1250): C:\Program Files (x86)\AOMEI OneKey Recovery 1.2>C:\WINDOWS\system32\bcdedit.exe /enum /v



Any help/suggestions appreciated.





System Backup Win10 Getting Started

$
0
0

Hi, just installed Backerupper, began a Windows 10 "System Backup", selected a folder on a USB attached drive in Step2, "Start Backup" button is gray but doesn't respond to Click, nothing happens.

he is level having Buy FIFA Coins

$
0
0

The most underrated player in United's side, though, is probably Luke Shaw. It is an clear oversight-the youngster struggled in his first season at United. However, the superb form they showed before he broke his leg there is much surprise was a decent depiction of how effective he previously been at Southampton.

United were willing to pay £27 million fifa 16 coins for him as soon as he was 18 since his talent was obvious-not just regarding future potential but also regarding immediate readiness.

At 77, he is level having Danny Rose and Jose Holebas along with behind Baba Rahman, Ryan Bertrand and Alberto Moreno, as well as this division's more illustrious left-backs such as Leighton Baines and Cesar Azpilicueta.


Shaw's form means he should be in the top a few in the division when it comes to buy  FIFA 16 Coins  ranking. Few United fans would swap him for any of those rated preceding him, and for that cause, he is the U . s . player most underestimated by simply EA Sports' team.


After fifa 16 in danger, the price has already been volatile, and many players are upset and need to discover cheap seller, I found a inexpensive price and very great site, now for everyone to share with you.

do you want to get more fifa 16 coins? you buy fifa 16 coins, we will give you 3% more coins, coupon code :fifa003 at 

http://www.fifacoin-buy.com


imfifacoinsbuyers


safewow provide 8% off ffxiv gil during 11.20-11.30 for Thanksgiving Day gift

$
0
0

/

"Absolutely. There's no question buy cheap ffxiv gil about that," Lythgoe says. Going forward, it is obvious that understanding consumer purchase patterns and preferences will be a necessity for continued success. Advanced analytics provided by platforms such as Live Gamer's are a valuable resource for tracking these patterns.".

It was like an eightfoot hole and my older brother Todd ended up coming back in and grabbing me. I just remember running out, running across our gravel road out there and rolling in the grass."Ryan may not remember much. Your ABScertified submarine features threeaxis maneuverability and dives to 1,000 feet. Enjoy 360degree views from your high density acrylic bubble, luxury leather seats with our logo, joystick steering and air conditioning.

TreatmentThe first and easiest step you can take if you think your teen has a problem with computer addiction is to move the computer out of his room and insist that he only use it in a common area and for a limited period of time each day. If this isn't enough to control the problem, you might need to consult a counselor.

Now I feel like I ready to go to Beijing. Olympic trials: was incredibly nerveracking. A logger supposedly discovered the tunnel in 1928 and ended up in Las Vegas with some of the gold. There was supposedly a gold bar from the tunnel on display at the Mineral Titles office in Victoria, BC until the early 1980s but no one knows the location of the gold bar now.

The guild leaders told everyone to go to Org and 'meet up' before the raid. Once we had everyone there (about 20 players all over the world!) Dillon showed up and the real event began. Women of Philippines are extremely well known for their beauty and attractiveness. They have an extremely loving and caring nature and you can be assured that you will be happy if you finally settle down with such a girl.

Join a church. Join the Arts Station. Consider Dale Pale Ale, which has won all sorts of honors, and my respect. Some brews can be dark, creamy, fullbodied and all sorts of new sensations. A lot of rich tradition here. Whoever takes it over we just hope that they have as good and long of a run as Packard's.

"I use SL to escape from work and all of that and to chill out. However, I did meet a lady on here one time who was using it for autistic people to enable them to experience things they couldn't do in real life, like making friends and socialising.

WoW is very good for solo play. In fact, short of a few high end dungeon raids, thats about all people do. This dreamcometrue outfit will never be available after the game launches, and with it you can impress friends down the road by proving your status as a pioneer player. Five Free Guest Passes Online games are all about having fun with your friends, and only in the Collectors Edition will you get five special guest passes to Hyboria.

In order to Celebrate Thanksgiving Day coming ,Safewow.com provide 8% off discount code for ffxiv gil now!

Welcome to be a safewow member gain free 100 Reward Points(($1) now.

Never miss using 8% discount code THANKU to buy cheapest ffxiv gil from http://www.safewow.com/final-fantasy-xivFrom November 20, 2015 to November 30, 2015.

 

 


Viewing all 8490 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>